If you don't see what you are looking for please call us at
1-800-Tooling or 1-828-628-4414 be tween the hours of 8 a.m and 5:00 p.m. EST, Mon. through Fri.

V-Paneling Cutter Sets

These cutters sets are designed to make V-groove paneling with a strong tongue and groove joint. Each set can be used with 1/2", 3/4" and 1" stock. Shims are included to allow the thickness of the tongue to increase as stock increases. UP190 cuts a V-Groove on both sides of the paneling, while UP191 only cuts a V-groove on one side.

Freud V-Paneling Cutter Sets
Part No# Overall Diameter (D) Cut Depth (C) Carbide Height (H)

Minor Height

Tenon Thickness
Tenon Length
Bore Dia. Price
UP190 4-1/8" 19/64" 31/32 -
19/64" 3/16" - 19/64" 19/64" 1-1/4" CALL
UP191 4-1/8" 9/32" 1-1/16 - 1-3/16 " 19/64" 3/16" -
9/32" 1-1/4" CALL
Freud Drawer Lock Cutter

Designed for 1/2" and 3/4" thick stock, these cutters provide a strong joint for drawer fronts. Run the drawer face flat on the shaper table, and the drawer sides vertically on the fence. Once correct setup is attained for drawer front, height of cutter does not need to be changed to run drawer sides.

Part No# Overall Diameter (D) Cut Depth (C) Carbide Height (H) Minor Height (m) Bore Dia. Price
EC240 2-7/8" 1/8" 33/64" 5/32" 33/64" CALL
UP240 3-15/16" 1/8" 1/8" 5/32" 33/64" CALL
Freud Finger Joint Cutters

This cutter is used where very strong joining is needed. The cutter has three balanced wings and will join wood up to 5/8" thick. Wider boards can be joined by stacking multiple cutters on the spindle. After the first board is cut, the spindle should be raised or lowered 1/8" to make the mating cut.

Part No# Overall Diameter (D) Cut Depth (C) Carbide Height
Minor Height
Bore Dia. Price
UP250 3-15/16" 11/32" 25/32" 15/64" 10° 1-1/4" CALL
To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
19 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.