CMT Router Bits
Solid Carbide Spiral Bits
Straight Bits
Slot Cutters
Tongue and Groove Set
Dovetail Bits

Flush trim Bits
Combination Trimmer Bits
Solid Carbide Trimmer Bits
Panel Pilot Bits
Cavetto Edge Mold Bits
Keyhole Bits
Bevel Cutters
Drawer Lock Bits
Weatherseal Bits
Finger Joint & Professional Finger Joint Bits
Bowl Cutters
Bowl and Tray Bits
Round Nose Bits
60° Lettering Bits
60° Laser Point Bits
90° V-Grooving Bits
Rabbeting Bits
Cove Bits
Ovolo Bits
Roundover/Beading Bits
Bull nose Bits
Table Edge and Hand Rail Bits
CMT T-Slot Bits
Reverse Glue Joint Bit
Click for Easy Setup Instructions

CMT's Reverse Glue Joint Bit produces an almost indestructible glue joint quickly and accurately. Ideal for joining wide panels, doors and furniture parts. By accurately centering the bit in the wood, the upper and lower vertical cutting edge - you will produce perfectly matched reverse cuts that form flawless joints. TIP: When gluing, apply enough pressure to securely seal the joint. Insufficient pressure results in a weak joint and excessive pressure will distort the wood.

SAFETY PRECAUTIONS: Use pusher blocks, featherboards and hold-down devices when milling these parts.

Shank Size - 1/2"
Item #
Cutting Dia.

Max. Joint Thickness

Mix and Match for Quantity Pricing
<img src="../../clearpixel.gif" width="1" height="1" vspace="5" hspace="100">


To reach a friendly voice, call during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

Wood Tech Enterprises
Our website:

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
15 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998 - 2011 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.